37, Jalan Bakawali 41,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+607-2889366
+607-2889266
- Building Material Spacer
- Conveyor Belt
- MPC Belt
- Rubber Belt
- Stamping Foil
- Belt Fastener
- Caterpillar Belt
- Conveyor belt / Open Mesh Belt
- Elevator Belt
- Elevator Bolt
- Elevator Bucket Bolts
- Plastic Elevator Bucket
- PTFE Tape
- Rubber Sheet
- Sealer Belt (PTFE)
- Steel Elevator Bucket
- Others
EAI Marketing Sdn Bhd
37, Jalan Bakawali 41,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
37, Jalan Bakawali 41,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
Peroxide Cured (EPDM) (TXEP111560)
| Previous | 1 / 7 | Next |
Features
- Standard Width : 1000mm
- Width Range : 100mm - 2000mm
- Length : 10m
- Thickness : From 1mm to 50mm
- Standard Color : Black
- Work Temperature : -30°C ~ +150°C
Peroxide cured EPDM Rubber sheeting exhibits good weathering resistant, heat resistant, ozone and hot steam resistant. This characteristic is very similar to premium EPDM but with enhanced temperature and better compression set. Peroxide cured EPDM rubber is also safe to drinking water applications, it is suitable for prolonged exposure to drinking water and will not deteriorate when submerged, making it suitable for gasket sealing applications.
Peroxide cured EPDM rubber sheet is the ideal choice for applications related to outdoor weathering, water dam and gasket in water dam and tank.
Advantage
- Better compression set
- Higher working temperature up to 150 Celsius
- Potable water, drinking water applicable
- Food safe
Applications
- Automotive
- Chemical industry
- Aerospace
- Fluid power
- Potable water
- Power train systems
- Safety and handling
- Fuel systems
- Appliances
- Food grade
| SPECIFICATION | TEST METHOD | TEST RESULT | UNIT |
| Specific Gravity | ASTM D297 | 1.10 | g/cm3 |
| Hardness | ASTM D2240 | 60 +/- 5 | Shore A |
| Tensile Strength | ASTM D-412 | 15 | MPa |
| Elongation | ASTM D-412 | 450 | % |
| Tear Strength | ASTM D-624 | 35 | kgf/cm |
| Compression Set (22 Hours at 70°C) | ASTM D-624 | 20 | % |
| HEAT RESISTANCE AGING (72 HOURS AT 100°C) | |||
| Hardness | ASTM D2240 | +/-15 | Shore A |
| Tensile Strength | ASTM D-412 | +/-30 | % |
| Elongation | ASTM D-412 | -50 | % |
| WORKING TEMPERATURE | ||
| In Air | -30°C | +150°C |
| In Oil | - | |
| In Water | +150°C |
MAIN CHARACTERISTICS
| ELASTICITY | COMPRESSION | ABRASION | FLAME | FUELS | OZONE |
| Good | Excellent | Poor | Poor | Fair | Excellent |